 190L
- The
Model 190L will disinfect up to 12 litres/sec.
(720 L.P.M.) of clean, clear quality drinking
water (providing the turbitity = <5 HTU and
colour = <5 HU units of colour) or 6 litres/sec.
for effluent.
- The
Model 190L will disinfect cooling tower water,
control Legionella pneumophila bacteria and
also reduce algae growth with some Hydrogen
Peroxide addition.
- Model
190L will disinfect hydrotherapy, swimming and
spa pool water in conjunction with an oxidant
residual.
- Operating
pressure: 207 kPa (30 psi) at 24°c
190M
- The
Model 190M will disinfect up to 12 litres/sec.
(720 1/m) of clear, clean water with Uv transmission
> 85%, @254nm wavelength.
- Operating pressure: 313 kPa (45 psi) at 24°c
190H
- The
Model 190H will disinfect up to 7 litres/sec.
(420 1/m) of clear, clean water.
- Operating pressure: 552 kPa (80 psi) at 24°c
The
principal uses for the Model 190 series are to disinfect:
- drinking
water (with < 5 N.T.U turbidity, 5 HU units
of colour)
- secondary
treated effluent (of <20 suspended solids,
<20 BOD, >50%Ý UVT quality)
- cooling
tower ponds, thus controlling Legionella pneumophila
and total plate count in the tower water
- aquarium, fish
hatchery and acquaculture water
- swimming, hydrotherapy
and spa pool water
- process water
For disinfection of
drinking water with <5 NTU turbidity, 5 HU
units of colour the maximum flow rate through
one model 190L is 8 litres/sec.
Power Consumption: 640
watts
Voltage and cycles:
Standard 230 volts 50Hz
Continuous operating
pressure: 207 kPa (190L), 313 kPa (190M), 552
kPa (190H), fluid temperature 24°c.
Also available at additional
cost: 230/220 volts 60Hz, 110/115 volts 60Hz
Model 190 Series is
an ideal building block for the above applications
and others: eg 2 Model 190L units installed in
parallel with disinfect 24 litres/sec of drinking
water (<5 N.T.U turbidity, <5 HU units of
colour)
 Advantages and Benefits
For detailed information on the
190 series, please download the PDF brochure ›› |
