• The Model 100L will disinfect up to 8 litres/sec. (480 1/m) of clean, clear quality drinking water (with < 5 N.T.U turbidity, 5 HU units of colour) or 4 litres/sec. for effluent disinfection.
• The Model 100L will disinfect cooling tower water, control Legionella pneumophila bacteria and also reduce algae growth with some Hydrogen Peroxide addition.
• Model 100L will disinfect hydrotherapy, swimming and spa pool water in conjunction with an oxidant residual.
• Operating pressure: 207 kPa (30 psi) at 24°c

  100M

• The Model 100M will disinfect up to 8 litres/sec. (480 1/m) of clear, clean water. UV transmission >85%
• Operating pressure: 313 kPa (45 psi) at 24°c

  100H

• The Model 100H will disinfect up to 6 litres/sec. (360 1/m) of clear, clean water.
• Operating pressure: 552 kPa (80 psi) at 24°c

  The principal uses for the Model 100 series are to disinfect:

• drinking water (with < 5 N.T.U turbidity, 5 HU units of colour)
• secondary treated effluent (of <20 suspended solids, <20 BOD, >50% UVT quality)
• cooling tower ponds, thus controlling Legionella pneumophila and plate count in the tower water
• aquarium, fish hatchery and acquaculture water
• swimming, hydrotherapy and spa pool water
• process water

For disinfection of drinking water with <5 NTU turbidity, 5 HU units of colour the maximum flow rate through one model 100L is 8 litres/sec.

Power Consumption: 320 watts

Voltage and cycles: Standard 230 volts 50Hz

Continuous operating pressure: 207 kPa (100L), 313 kPa (100M), 552 kPa (100H), fluid temperature 24°c

Also available at additional cost: 220 volts 60Hz, 110/115 volts 60Hz

Model 100 Series is an ideal building block for the above applications and others: eg 2 Model 100L units installed in parallel with disinfect 16 litres/sec of drinking water (<5 N.T.U turbidity, <5 HU units of colour) providing UV transmission is >85%, @254nm wavelength.

 Advantages and Benefits

 For detailed information on the 100 series, please download the PDF brochure ››